Philips 220-230-240V - Manual (Page 46)

OEM Catalogue 2009/2010 3.46
MASTERColour CDM-TT
CDM-TT 70W E27
Product Description
●
High-intensity discharge lamps with a CDM discharge tube inside a
SON lamp clear tubular outer bulb
Product Features
● Robust lamp giving a pleasant white light and a stable colour over
lifetime
●
Good colour rendering
● Dimming not recommended because of negative effects on lamp
performance (lumen maintenance, colour and life)
Product Benefits
● Runs on SON gear so directly replaces equivalent wattage SON
lamp for simple upgrade from yellow to white light
Application
●
City centres, shopping centres and pedestrian areas, residential
areas, road lighting
● City beautification: decorative lighting and floodlighting
Luminaires
● In the highly unlikely event of lamp breakage by incorrect use,
vandalism or end of life effects, the luminaire housing should be able
to contain heated glass, metal and / or ceramic particles
System
● Must be used in combination with a gear and an ignitor
●
Must be used with a SON gear and SON ignitor in accordance with
SON IEC standards (ignition pulse between 1.8 kV and 2.5 kV for
70 W)
●
For optimum lamp performance, the mains voltage may deviate by
maximum +6/-8% from the voltage indicated on the type plate
● Warm restart time can be up to fifteen minutes. if the lamp does not
start (e.g. with T5 ignitors), the installation must be switched off for
fifteen minutes
Recommended gear page 3.170
www.philips.com/OEM
D
L
C
O
CDM-TT
Type CMax DMax LNom ONom
MASTERColour CDM-TT 70W/942 E27 SLV 156 32.5 102 6
MASTERColour CDM-TT 150W/942 E40 SLV 211 46 133 8