Philips 220-230-240V - Manual (Page 134)

OEM Catalogue 2009/2010 3.134
HID-HeavyDuty BSN semi-parallel ignitor
BSN
Product Description
●
Encapsulated electromagnetic copper/iron gears for use with an
external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and
SON lamps (no ignitor needed for SON-I lamps)
Features and Benefits
● Outstanding product life
●
Excellent resistance to chemical attack, humid conditions and high
environmental stress crack resistance
● Separate earth terminal
●
All gears are equipped with ThermoSwitch protection against end-
of-lamp-life phenomena
● Compact dimensions and light weight with minimal watt losses,
thanks to orthocyclic winding process
● Equipped as standard with screw terminal blocks
● Gear can also be used in combination with a series (superimposed)
ignitor
● Gears for alternative mains voltages/frequencies on request
Applications
● Ideal for the following applications:
○ Outdoor: tunnels and parking areas
○ Outside luminaire: in the pole or electrical cabinet
○ Road and residential lighting
○
Area lighting, e.g. harbors, building sites, city centres, shopping
centres, pedestrian areas
● Climatic suitability: use in luminaires under normal humidity
conditions (not drip-proof)
Quality
Philips Quality assures optimum quality regarding:
● System supplier: As manufacturers of lamps and electromagnetic
control gear, Philips ensures that, from the earliest development
stage, optimum lamp/gear performance is maintained.
● European standards: Philips HID electromagnetic gears comply with
all relevant international rules and regulations.
Compliances and approvals
Safety EN 61347-2-9
Performance EN 60923
RFI EN 55015
Harmonics EN 61000-3-2
EMC immunity EN 61547
Approval marking ENEC
CE-marking
Environmental standard
ISO 14001
Recommended ballast page 3.170
www.philips.com/OEM