Philips EL2 Series - Manual

EL2 Series
6 V, 12 W A
RCHITECTURAL
E
MERGENCY
L
IGHTING
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Two rotatable
reflector assemblies with
adjustable beam patterns. Unit
includes 6 VDC, 6 W halogen
lamps housed in impact-
resistant lamp covers*.
* Replacement lamping: No. 784, T2.25,
G-4 two pin base, 6 V, 6 W miniature
lamp.
Housing: Impact-resistant,
injection-molded UL 94-5VA
flame retardant thermoplastic
housing. UV-stabilized to resist
discoloration. White finish is
standard, black is optional. Unit
is ceiling or wall mountable.
Battery: Maintenance free,
sealed nickel metal hydride
battery with 10 year life.
NiMH battery is a non-toxic,
environmentally friendly
product which is recyclable.
Electronics: 120/277
VAC dual voltage input.
Microprocessor controlled
charge, transfer, and
monitoring system. Charging
system is complete with
low voltage disconnect,
AC lockout, and brownout
protection. Includes an AC
indicator/systems status lamp
and manual test switch.
Self-Testing Diagnostics
(standard): Unit runs an
internal test every five seconds
for secondary voltage, charge
current, battery voltage, and
LED illumination. Performs
automatic 1 minute discharge
test every 30 days and
30 minute discharge test
every 180 days meeting and
exceeding UL 924 and NFPA
101 requirements. The infrared
option allows a remote control
to initiate a 5 second and 30
minute self-test in addition to
the standard 1 minute and 90
minute manual test capability.
Electrical Specifications:
(120 VAC) .103 A, 11.3 W
(277 VAC) .044 A, 11.6 W
Code Compliance
UL 924 listed. NFPA 101
illumination standards.
Warranty
Three year full electronics
warranty. Five year full plus
five year prorated battery
warranty.
EL2WN
6.4"
(16.3 cm)
2.5"
(6.4 cm)
6.7"
(17.0 cm)