Baxi Potterton ECOGEN 24/1.0 - Manual (Page 9)

6.0 Setting the DHW Times
9
© Baxi Heating UK Ltd 2010
Menu Button
Display Screen
04. November 2008 08:50
Tuesday
Dial Knob
6.1 Programming the Domestic Hot Water Times
The programmar enables control of up to three periods a day,
seven days a week.
There are 3 time programs preinstalled to aid reprogramming:-
Time program 1 is the default with 3 time periods - Mon-Sun,
6-9, 11-12 and 15-22.
Time program 2 has two time switch periods - Mon-Sun, 6-9
and 15-22.
Time program 3 has one time switch period 6-22.
‘Preselection’ regimes are: Mon-Sun (Default) Mon-Fri and
Sat-Sun or each day individually.
If there are two heating circuits with two PRU’s each room/floor
must be programmed using the respective PRU. Choose the
relevant heating circuit at STEP 3.
When programming individual days, the opportunity to copy one
day to another is offered (screen 529). Lastly screen 536 enables
a reset to the default values as given above.
04. November 2008 08:50
Tuesday
Set time and date
---------------------------------------------------
Information
1. The basic display is shown.
If the basic display is not
showing, press the MENU
button.
Press the MENU button.
Holidays heating CH1
Time central heating CH1
Time hot water
Mon - Sun
Select days
Time hot water
Turn the Dial Knob clockwise
to highlight ‘Time hot water’.
Press the Dial Knob to
select .
Press the Dial Knob and the
day / days regime flashes.
Turn Dial to the required day
or days Mon-Sun, Mon-Fri,
Sat-Sun,
Mon, Tue, Wed,
Thu, Fri, Sat, Sun
Press Dial to
select.
Mon - Sun
Select days
Time hot water
Turn the Dial Knob one click
clockwise.
Select default timings?
Mon - Sun
Time hot water
Set to Time setting 1
Mon - Sun
Time hot water
Press the Dial Knob and the
time program regime flashes.
Turn Dial to the ‘Time setting
1’. Press Dial to select and the
screen goes back to STEP 6.
06:00
Mon - Sun: 1st Time ON
Time hot water
Turn the Dial Knob one click
clockwise.
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
STEP 7 STEP 8