0 mode selection/temp adjustment – Baxi Potterton ECOGEN 24/1.0 User Manual

Page 13

7.0 Mode Selection/Temp Adjustment

Temps / mode CH1

Time hot water

Holidays heating CH1

Day / month

- -.- -

Start

Holidays heating CH1

Day / month

- -.- -

End

Holidays heating CH1

HOLIDAY MODE

STEP 1 - Press the MENU button.

STEP 2 - Turn the Dial Knob to highlight

‘Holidays heating CH1’ and press the Dial

to select the start period.

STEP 3 - Press the Dial Knob and the

Day/month starts flashing, turn the Dial to

required month and press Dial to select

and then repeat to select the day.

STEP 4 - Turn the Dial Knob to highlight

‘End’ and press the Dial. The Day/month

starts flashing, turn the Dial to required

month and day as in STEP 3 to end the

holiday period.

7.6

Holiday mode

1. Holiday - When the holiday mode is activated the

‘protection’ mode is activated for the selected period see

section 7.1

2. The Holiday mode is activated by using the menu button

scroll down to ‘Holiday heating CH1’, press the dial

3. Press again to set the month scroll and select – (the display

will start at 01,01) set the day scroll and select. Scroll again to

‘Operating’ level, scroll between - protection and reduced -

select the mode required

7.7

Programme Lock

1. There is a programme lock function available to stop the

programmer being either tampered with or accidentally altered.

2. After the programme lock has been activate, only the

temporary setpoints, comfort, reduced temperature or the

functions via the easy menu such as standby/operation or HW

push are available for change by the user.

3. To activate the programme lock: -

a) Press the menu button to access ‘info’, then scroll and press

to choose ‘operator section’, scroll to the programme lock

option, press and scroll from ‘off’ to ‘on’. Confirm by pressing

the dial knob.

b) Accessing programme lines is now still possible but when

attempting to alter any parameters the screen will show

‘programme locked’.

4. To remove the programme lock: -

a) To temporarily unlock the programmer press the menu

button to access ‘info’ then press and hold the easy menu and

dial button until ‘programme temporarily unlocked’ appears.

b) In this state any alterations can be made until returning to the

standard screen when the programming lock is activated again.

c) To remove the programme lock permanently: - whilst

temporarily unlocked, access the programme lock screen as

described above, and press and scroll from ‘on’ to ‘off’. Confirm

by pressing the dial button.

Menu Button

Dial Knob

04. November 2008 08:50
Tuesday

Easy Menu

Button