Panasonic KX-FL511AL - Manual (Page 42)

7. Programmable Features
40
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
L If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
“ ON” (default): You will hear connecting tones.
“ OFF”: Deactivates this feature.
Code #79: Setting toner save feature
TONER SAVE
=OFF [ ±]
“ ON”: The toner cartridge will last longer.
“ OFF” (default): Deactivates this feature.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [ ±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “ YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
L The location setting (feature #74, page 39)
will not be reset.
7.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
Program code and direct command key
{#}{ 0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 18 for details).
{#}{ 0}{2} Your logo
L Enter your logo using the dial keypad (see
page 19 for details).
{#}{ 0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 20 for details).
{#}{ 0}{4} Sending report
– { 1}:“ ON”
– { 2}:“ OFF”
– { 3}:“ ERROR” (default)
{#}{ 0}{6} Fax ring count
– { 2}:“ 2” (default)
– { 3}:“ 3”
– { 4}:“ 4”
– { 5}:“ 5”
– { 6}:“ 6”
– { 7}:“ 7”
– { 8}:“ 8”
– { 9}:“ 9”
{#}{ 1}{2} Remote activation ID
– { 1}:“ ON”
– { 2}:“ OFF” (default)
L If you select “ ON”, then enter your ID from 1 to
5 digits using 0-9, * and #.
{#}{ 1}{3} Dialling mode
– { 1}:“ PULSE”
– { 2}:“ TONE” (default)
{#}{ 1}{7} Ringer pattern
– { 1}:“ A” (default)
– { 2}:“ B”
– { 3}:“ C”
{#}{ 2}{2} Journal report
– { 1}:“ ON” (default)
– { 2}:“ OFF”
{#}{ 2}{3} Overseas mode
– { 1}:“ NEXT FAX”
– { 2}:“ OFF”
– { 3}:“ ERROR” (default)
{#}{ 2}{5} Delayed transmission
– { 1}:“ ON”
– { 2}:“ OFF” (default)
L If you select “ ON”, then enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 38 for details).
{#}{ 2}{6} Caller ID list
– { 1}:“ ON” (default)
– { 2}:“ OFF”
FL511AL.book Page 40 Tuesday, October 7, 2003 2:18 PM