6 receiving a fax manually, 7 receiving a fax automatically, Receiving a fax manually – Panasonic KX-FL511AL User Manual
Page 33: Receiving a fax automatically, 6 receiving a fax manually, 7 receiving a fax automatically, 1 activating tel mode, 1 activating fax only mode
4. Fax
31
4.6 Receiving a fax
manually
4.6.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{
AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L
The AUTO ANSWER light is OFF.
How to receive calls
1. When the unit rings, lift the handset to answer
the call.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press {FAX START}.
CONNECTING.....
3. Replace the handset.
L
The unit will start fax reception.
L
If you do not answer the call within 10
rings, the unit will temporarily switch to fax
reception. The other party can then send
a fax.
To stop receiving
Press {STOP}.
Extension telephone
You can receive fax documents using an
extension telephone.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press *#9 (pre-selected fax activation code)
firmly.
3. Replace the handset.
L
The fax machine will start reception.
Note:
L
To receive fax documents using the
extension telephone, you must set the
remote fax activation to ON (feature #41,
page 39) beforehand.
4.7 Receiving a fax
automatically
4.7.1 Activating FAX ONLY mode
Set the fax machine to FAX ONLY mode by
pressing {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
{
FAX START}
{
STOP}
OFF
ON
FL511AL.book Page 31 Tuesday, October 7, 2003 2:18 PM