Pentax AF-360FGZ - Manual (Page 60)

58
TTL Auto Flash
(TTL) 672 - In trailing curtain sync or contrast control sync mode, the flash mode
will automatically be switched to (TTL) when you press the shutter
release button halfway down, even if you have set it to manual (M).
645N2, 645N,
Z/PZ series, MZ/ZX
series (except MZ-M/
ZX-M), SFX
N
/SF1
N
,
SFX/SF1
- When the exposure mode is Programmed AE, Shutter Priority AE, or
Aperture Priority AE, the flash mode will automatically be switched to
(TTL), even if you have set it to manual (M). You can actually use Manual
flash mode (M) when the camera exposure mode is set to Manual (M).
- In trailing curtain sync or contrast control-sync mode, the flash mode
will automatically be switched to (TTL) when you press the shutter
release button halfway down, even if you have set it to manual (M).
- If the camera exposure metering timer is on (information is displayed in
the viewfinder), you cannot select (A) or (M) by pressing the flash mode
button (MODE).
- You cannot use (TTL) with the SF7/SF10.
645, Super A/
Super Program, LX
-
Auto Flash (A) Aperture setting
capable Pentax single
lens reflex cameras - Under the following conditions, autofocus cameras can also use (A).
- The camera exposure mode is set to manual exposure.
- The camera exposure metering timer is off.
- With the following combinations of cameras and exposure modes, you
cannot photograph correctly if the aperture is set to a value brighter than F2.
Camera: Z-5P, Z-5, Z-1P/PZ-1P, Z-1/PZ-1, SFX
N
/SF1
N
, SF7/SF10, SFX/SF1
Exposure mode: Programmed AE and Shutter Priority AE modes
Manual Flash
(M) Aperture setting
capable Pentax single
lens reflex cameras
-
Flash Mode Camera Notes
00_AF360FGZ.book Page 58 Tuesday, June 13, 2006 12:09 PM