Pentax AF-360FGZ - Manual (Page 50)

48
Set the zoom position to suit the subject and
place the flash unit at the desired location.
l When setting up a flash unit separately from the
camera, use the off-camera shoe adapter F when
using a tripod, or the off-camera shoe clip CL-10
when setting up in another location such as
tabletop, chair, etc.
Turn the flash unit on the camera on.
l If the camera's built-in flash unit is part of the
combination, pop up the built-in flash unit.
Check that the ready lamp is lit, then take the
picture.
l When charging is complete, ( ) is lit in the
viewfinder of the camera.
The ready lamp is lit on the AF360FGZ.
l Position the slave unit(s) so that the slave
sensor can receive the flash fired by the
camera’s built-in flash unit or attached flash unit.
l The AF360FGZ will fire at the same time that the
camera’s flash fires.
l Keep the distance from the built-in flash unit and
AF360FGZ to the subject within 4 meters.
l The slave unit will turn off automatically after
about 1 hour of non-operation when the auto
power off function is set.
l Do not use red-eye reduction with the camera’s
flash. This will result in the AF360FGZ firing by
the pre-flash. For the same reason, set the
camera to manual focus when firing the flash
continuously so that the AF spotbeam does not
operate with cameras that have AF spotbeam
functions.
5
6
7
00_AF360FGZ.book Page 48 Tuesday, June 13, 2006 12:09 PM