Pentax AF-360FGZ User Manual
Page 47
45
(Using the AF360FGZ in Combination with
another AF360FGZ)
First, set the wireless mode and channel of the
AF360FGZ attached to the camera, and register
the channel on the camera.
Turn the camera off and then attach the
AF360FGZ to the hot shoe of the camera.
Set the power switch of the flash unit to
(WIRELESS).
Set the wireless mode switch to (C) or (M).
Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
Press the channel button (CH) and select a
channel from 1CH to 4CH.
1
CONTROL: When using the flash unit
attached to the camera as the
control flash
MASTER:
For using both flash units as main
flashes.
00_AF360FGZ.book Page 45 Tuesday, June 13, 2006 12:09 PM