Pentax AF-360FGZ - Manual (Page 45)

43
(Using the AF360FGZ in Combination with a
Built-in Flash Unit)
Firstly, set the wireless mode and channel of the
AF360FGZ, and register the channel on the
camera.

Turn the camera off and then attach the
AF360FGZ to the hot shoe of the camera.
 Set the power switch of the flash unit to
(WIRELESS).
 Set the wireless mode switch to (S), so that
SLAVE is displayed in the upper right corner of
the LCD panel.
l You cannot set the flash unit to SLAVE while the
exposure metering timer is on (while information
relating to aperture etc. is displayed in the
viewfinder).
 Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
 Press the channel button (CH) and select a
channel from 1CH to 4CH.
 Slide the setting switch back up to the (white
dot).
Wireless High-Speed Sync Photography
1
00_AF360FGZ.book Page 43 Tuesday, June 13, 2006 12:09 PM