Pentax AF-360FGZ User Manual
Page 29
27
n
Manual Flash
Refer to page 22 for the features and conditions of use
of this flash mode.
Procedure
Turn on the power switch.
Press the flash mode button (MODE) to display
(M) (1/xx) on the LCD panel.
l
You can set the flash output from 1/1 to 1/32. See
page 15.
Set the zoom position. (The setting method
differs according to your camera and lens. Refer
to page 18.)
Set the lens aperture according to the distance to
the subject.
l
Refer to page 79 for the guide number table.
Example:
If the flash zoom position is 35mm, subject distance
(between the AF360FGZ and subject) is 3 m, and
sensitivity is ISO 100, the calculation will be as
follows:
With flash output (1/1), the Guide No. will be 25
(according to the Guide No. table).
Aperture = Guide No. 25 / Subject distance 3 m =
8.3 Approx. 8 (f/Stop)
1
2
3
4
00_AF360FGZ.book Page 27 Tuesday, June 13, 2006 12:09 PM