Panasonic KX-FG2451 User Manual
Page 55
10. Help
55
For assistance, please visit http://www.panasonic.com/consumersupport
10.2.2 Cordless handset
“INCOMPLETE”
L The phonebook copy stopped because the destination cordless handset
was out of range. Press
{STOP} to clear the message.
“MEMORY FULL”
L When making a copy, the document being stored exceeded the memory
capacity of the unit. Press
{STOP} to clear the message. Divide the
document into sections.
“MESSAGE FULL”
L There is no room left in memory to record voice messages. Erase
unnecessary messages (page 40, 41).
“MODEM ERROR”
L There is something wrong with the unit’s modem. Contact our service
personnel.
“NO FAX REPLY”
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“NO ITEMS STORED”
L You tried to copy your phonebook items to the cordless handset, but your
phonebook was empty.
“OPEN CABINET
CHECK FILM SLACK”
“OPEN CABINET
CHECK FILM TYPE”
L Please use genuine Panasonic replacement film (page 7).
L The ink film is slack. Tighten it (see step 5 on page 11).
L The fax machine is positioned near appliances such as TVs or speakers
which generate an intense magnetic field.
“PAPER JAMMED”
L A recording paper jam occurred. Remove the jammed paper (page 63).
L You forced the recording paper into the paper tray too strongly. Remove all
of the installed paper, and re-install it gently.
“PHONEBOOK FULL”
L There is no space to store new items in the phonebook. Erase unnecessary
items (page 23).
L The phonebook memory of the cordless handset is already full, or became
full when copying phonebook items. Copying was stopped. Press
{STOP}
to exit the mode (page 24). Erase other stored items in the cordless handset
phonebook (page 23), then try again.
“PLEASE WAIT”
L The unit is checking that there is no slack or crease in the ink film. Wait for
a moment while the check is completed.
“RECORDING ERROR”
L You recorded your greeting message or memo message less than 1 second
in length and recording has failed. Try again.
“REDIAL TIME OUT”
L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“REMOVE DOCUMENT”
L The document is jammed. Remove the jammed document (page 64).
L Press {STOP} to eject the jammed paper.
“SERIAL ERROR”
L There is something wrong with the unit and the base unit will not work.
Contact our service personnel.
“TRANSMIT ERROR”
L A transmission error occurred. Try again.
L If you send a fax overseas, try the following:
–
Make sure the other party’s number is a fax number.
–
Use the overseas transmission mode (feature #23 on page 46).
–
Add 2 pauses at the end of the telephone number or dial manually.
“UNIT OVERHEATED”
L The unit is too hot. Stop using the unit for a while and let the unit cool down.
Display
Cause & Solution
“Busy”
L The called base unit is in use.
Display
Cause & Solution