Palm Zire 21 - Manual (Page 157)

Date and Time preferences
147
2. Tap Details.
3. Tap the Speed pick list and select the appropriate speed.
4. Enter the initialization string supplied by the documentation for the modem
attached to your mobile phone, if necessary.
5. Tap OK, and then tap OK again to save the configuration.
After you create the configuration, you need to set up HotSync Manager and the
HotSync application on your handheld to perform a modem HotSync operation.
Date and Time preferences
The Date and Time Preferences screen enables you to set the date, time, time zone,
and Daylight Saving option on your handheld. See
“Customizing your handheld”
in Chapter 2 for information about using this screen.
Digitizer preferences
The Digitizer Preferences screen opens the digitizer calibration screen. This is the
same screen that appears when you start your handheld for the first time.
You can recalibrate your screen after a hard reset, or if your digitizer drifts.
Formats preferences
Use the Formats Preferences screen to set the country default and the display
format of the dates, times, and numbers on your handheld.
Country default
The country default sets date, time, week start day, and number conventions based
on geographic regions where you might use your handheld. For example, in the
United Kingdom, time often is expressed using a 24-hour clock. In the United
States, on the other hand, time is expressed using a 12-hour clock with an am or pm
suffix.
Tap here