4 mobile application on vehicles, 5 using the touchscreen, 6 use/storage – Psion Teklogix Vehicle-Mount Computer 8590 User Manual
Page 158: 7 disposal
Chapter 10: Common Mistakes & Helpful Tips
Mobile Application On Vehicles
132
8580/8590 Vehicle-Mount Computer User Manual
10.1.4 Mobile Application On Vehicles
•
Never connect a 12VDC device to a 24/48VDC vehicle!
•
Never connect a 24/48VDC device to a 12VDC vehicle!
•
Never connect a 12/24/48VDC device to vehicles with more than a 60VDC
voltage.
•
Ensure that supply lines are fused correctly.
•
Lay the supply cable so that it will not get crushed or frayed.
•
Read the labeling on the cable and connect the supply cable with the correct
polarity.
•
Observe the vehicle manufacturer's instructions for connecting additional
loads, for instance, in conjunction with an emergency shut-off switch.
•
Connect the supply cable to a suitable place. Ensure that the connecting
cable has an adequate cross section and ampacity at the connection point.
10.1.5 Using The Touchscreen
•
Please do not use sharp or abrasive objects on the 8580/8590 touchscreen.
•
Do not use abrasive cleaning agents to clean the front of the device. The
best results are obtained using a damp, non-abrasive cloth with any com-
mercially-available window cleaner that does not contain ammonia. Apply
the window cleaner to the cloth instead of spraying it directly onto the
touchscreen surface. Do not use sulfurous agents.
10.1.6 Use/Storage
Please observe the 8580/8590 maximum operating and storage temperatures. Make
sure you know which type of device is being used:
•
With or without heating module
•
Which type of display is used
The temperature ranges mainly depend on these two components.
10.1.7 Disposal
The Psion Teklogix general terms and conditions set out the obligations for disposal
in accordance with official electronics regulations.