Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 105)

8580/8590 Vehicle-Mount Computer User Manual 79
Chapter 6: Operating System & Software Applications
Settings
Set boot command (BootCmd)
• Tap Set Command to apply the settings.
• Tap the Exec. Restart button to restart the computer and activate
the settings.
6.2.3.9 Settings
In this menu, Psion Teklogix Config is configured with respect to password,
language etc.
No command The set boot commands are deactivated again.
Activate write protection
(ENABLE)
Activates write protection: All system changes are written
exclusively to the main memory; they are discarded when
the computer is restarted.
To activate this setting, reboot the computer!
Deactivate write protec-
tion (DISABLE) Disables write protection.
To activate this setting, reboot the computer!
Deactivate and take over
(DISABLE+COMMIT)
This setting is a combination of Deactivate write protection
and Take over changes: Write protection is deactivated;
changes are applied.
Take over changes
Temporarily deactivates write protection in order to
commit current changes to the system. Once finished,
write protection is immediately active again.