Psion Teklogix Vehicle-Mount Computer 8590 - Manual (Page 109)

8580/8590 Vehicle-Mount Computer User Manual 83
Chapter 6: Operating System & Software Applications
Logon With The Software Keyboard
If the file Keyboard.cfg cannot be located by the system in the Software Keyboard
installation directory, an error message appears.
If the keyboard is started by Psion Teklogix Config, it is also terminated when Psion
Teklogix Config is closed.
6.3.2 Logon With The Software Keyboard
The Software Keyboard (version 1.5 and higher) can be used to log on to the
Microsoft Windows system.
The logon settings are stored in one of the following locations:
• In the Psion Teklogix Config Menu System settings, parameter Logon with
Software Keyboard (e.g., on Psion Teklogix devices with Psion Teklogix
Config program), or
• In the file Psion TeklogixCfg_Local.cfg (e.g., on Psion Teklogix devices
without Psion Teklogix Config program).
The two alternatives are described below.
Psion Teklogix Config Setting
Psion Teklogix Config menu System settings, parameter Logon with Software
Keyboard:
Psion TeklogixCfg_Local.cfg Setting
In 8580/8590s without Psion Teklogix Config, the setting can be implemented in the
file PTXCfg_Local.cfg:
[Psion TeklogixCfgSystem]
LogonKeyboardShow=1
LogonKeyboardCfg=C:\Psion Teklogix\Keyboard.cfg
Show Software Keyboard
at logon
If this check box is selected, the Software Keyboard is
already available to the user upon logging in.
This is the default setting.
Keyboard definition
A CFG file and hence a particular keyboard layout can be
specified for the logon (it may differ from the default key-
board). Changes to this setting are activated only after the
computer has been restarted.