beautypg.com

Afety, Nstructions, Ead before operating equipment – Philips DSX 5150 User Manual

Page 3

background image

3

S

AFETY

I

NSTRUCTIONS

- R

EAD BEFORE OPERATING EQUIPMENT

.

WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE ANY ELECTRICAL EQUIPMENT TO RAIN OR MOISTURE.

1. Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions

should be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should

be followed.

5. Attachments – Do not use attachments not recommended

by the manufacturer as they may cause hazards.

6. Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, near a swimming pool, etc.

7. Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table.The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product.
Any mounting of the appliance should follow the manufacturer's
instructions, and should use a mounting accessory recommended
by the manufacturer.

7A.

An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.

8. Ventilation – Slots and openings on the cabinet are provided

for ventilation and to ensure reliable operation of the product
and to protect it from overheating.These openings must not be
blocked or covered.The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed near or over a radiator or heat
register.This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.

9. Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your appliance dealer or local power company.

10. Grounding or Polarization – This product is equipped with a

polarized alternating-current line plug (a plug having one blade
wider than the other).This plug will fit into the power outlet only
one way.This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.

11. Power Cord Protection – Route power supply cords so that

they are not likely to be walked on or pinched by items placed
upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
appliance.

12. Outdoor Antenna Grounding – If an outside antenna or cable

system is connected to the product, be sure the antenna or cable
system is grounded to provide protection against voltage surges
and built-up static charges.

Section 810 of the National Electrical Code,ANSI/NFPA 70,
provides information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure A.

13. Phone Line Use – Avoid using a telephone (other than a

cordless type) during an electrical storm.There may be a remote
risk of electric shock from lightning. Do not use the telephone to
report a gas leak in the vicinity of the leak.

14. Lightning – For added protection for this product during a

lightning storm or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system.This will prevent damage to the product
from lightning and power line surges.

15. Power Lines – An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall onto such power lines or
circuits.When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or
circuits as contact with them might be fatal. Refer to Satellite Dish
Antenna Assembly & Alignment Guide.

16. Overloading – Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.

18. Servicing – Do not attempt to service this product yourself, as

opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.

19. Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel
under the following conditions:

a.When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when following the

operating instructions.Adjust only those controls that are
covered by the operating instructions, as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.

e. If the product has been dropped or the cabinet has been damaged in

any way.

f.When the product exhibits a distinct change in performance – this

indicates a need for service.

20. Replacement Parts – When replacement parts are required,

be sure the service technician has used replacement parts
specified by the manufacturer or which have the same
characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards.

21. Safety Check – Upon completion of any service or repairs to

this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.

22. Carts and Stands – The appliance should be used only with a

cart or stand recommended by the manufacturer.

23. Heat – The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products that
produce heat.

Figure A

This manual is related to the following products: