Settings – POLAR F92tiTM User Manual
Page 9
50
ENGLISH
2. SETTINGS
In the Options mode you can set
•
your personal user information which is a prerequisite for
using OwnZone and OwnCal functions
•
measurement options which are used during Exercise mode
•
watch functions
•
Polar Fitness Test function ON or OFF
At any time during the settings you can return to the Time of day display
by pressing and holding START/STOP/OK.
The digits run faster if you press and hold the
Up or
Down.
Release the button at the desired value.
2.1 USER INFORMATION SETTINGS
Begin with the display showing the time of day.
1. Press Up or Down until OPTIONS is displayed.
2. Press START/STOP/OK to enter the Options mode.
USER SET is displayed.
3. Press START/STOP/OK to enter the user information loop.
Setting User 1 or 2
If you are in the Time of day display start from User information.
You can set two users’ preferences.
This function is practical e.g. for another
family member. Make the settings ready for
both users: when you start exercising, just
select your personal user id 1 or 2.
USER appears, 1 or 2 is flashing.
1. Press Up or Down to select USER 1 or USER 2.
2. Press START/STOP/OK to lock your selection.
You have now selected the user id. All settings are made to
the selected user.
In File, Measure, Options and Fitness test main modes you can change the
user id by pressing and holding
Up.
If you want to disable the user id 2, set the weight of the user 2 to
zero.
Continue by setting your weight or return to the Time of day display
by pressing and holding START/STOP/OK.