POLAR F92tiTM User Manual

Page 7

ENGLISH

7. Put the link cover on top of the

extension link so that the spring bar is
correctly placed on one side of the link
cover. Then press the spring bar from
the other side and slide the link cover
to its place. You will hear a klicking
sound, when the spring bar is placed
correctly.

Link cover

8. There are three small holes on both

sides of the buckle plate.
By shifting the spring bar you can do
the final adjustment of the band
length.

Buckle
Adjustment holes

1.1 BUTTONS AND THEIR FUNCTIONS

Start/Stop/Ok

• Start heart rate measurement
• Start the stopwatch
• Stop the stopwatch

• Backlight on

• Signal sound on or off

Reset

• Resets the heart rate monitor, watch settings will return to the

default settings.

Briefly pressing a button (approximately 1 second) will do different things than
pressing and holding button for a longer period of time (approx. 2 to 5 seconds).

START/STOP/OK

LIGHT

DOWN

If you need to shorten the wrist band more repeat the steps 1–7 but
remove the link from the opposite side this time so that the buckle
will stay in the middle. Please note that you can only detach the
extension links with small arrows on their back side.

Down
• Move backward to the

previous mode

• Select the desired value

(down)

Up
• Move forward to the next

mode

• Select the desired value

(up)

• Activate the displayed mode
• Lock your selection

RESET