Philips BDP7200 - Manual (Page 31)

31 EN
C
onnec
tions
Pla
yback
F
unc
tion
S
e
tup
O
thers
In
tr
oduc
tion
Basic
S
etup
LIST OF SETTINGS
Category Menus Options/Sub-Menus Description
A
d
v
anc
ed
S
e
tup
Video
Output HDMI 1080p/fps
This feature is
available only when
the display device
is connected by an
HDMI cable. •
Auto “Auto”:
Output the picture in 1080/24p
when it meets all the conditions
listed below:
The video resolution and the
frame rate of the material is
1080/24p (1080 progressive
with 24 frames per second).
“HDMI Video Resolution”
setting is set to “1080p”.
The display device supports
the 24p (24 frames per second,
progressive) output.
“Off”:
Output the picture in 60p. (60
frames per second, progressive)
•
•
•
Off
HDMI Video
Resolution*
This feature is
available only when
the display device
is connected by an
HDMI cable.
Refer to page 35 for
more information. •
•
Auto Set the resolution of the video
signal being output from the
HDMI OUT.
The selected resolution must
also be supported by your TV
monitor. •
480p
720p
1080i
1080p
HDMI Deep Color
This feature is
available only when
the display device
is connected by an
HDMI cable, and
when it supports
deep color feature. •
Auto Deep color reduces the
posterization effect of the
playback picture.
“Auto”:
Reduces the posterization effect
by automatically outputting the
10 bit color whenever the unit
recognizes the connected display
device supports deep color
feature.
“Off”:
Outputs the standard 8 bit color.
Off
Component Output 480i Set the resolution for the
component output picture.
The selected resolution must
also be supported by your TV
monitor.
Refer also to your TV’s manual.
If you have selected the
resolution not supported by
your TV by mistake and the
picture gets disturbed, press
[
B(PLAY)] and hold on the
front panel for 5 seconds to
change the setting back to its
default.
When HDMI cable is connected,
only “480i” and the resolution
selected in the “HDMI Video
Resolution” will be available.
•
•
•
•
480P
720P
With regard to the DVD-Video
with a copy protection, the
resolution will be set to 480p
regardless of the setting here.
If 480p output is not available,
480i will be output.
1080i
De-interlacing Mode Auto “Auto”:
Automatically detects the film or
the video content, and
appropriately converts it.
“Video”:
Select when the picture is
distorted when using “Auto”.
Video
Black Level On Black level enhances the
blackness of the black part of the
playback picture.
Off
E5E10UD_EN.indb 31 E5E10UD_EN.indb 31 12/28/2007 9:25:54 AM 12/28/2007 9:25:54 AM