Lantronix XPort - Manual (Page 18)

Getting Started
XPort™ User Guide
Figure 1-1. Lantronix Web-Manager
On the left , Web-Manager has the following menu options (pushbuttons):
Unit Configuration
Server Properties
Port Properties
Factory Settings1
Update Settings
Select Channel
4. Use the Menu to navigate to sub pages where you can configure server settings.
5. When you are finished, click the Update Settings button to save your settings.
Notes:
The next chapter, 4:Using Setup Mode, explains the configuration settings in
detail.
You must use Setup Mode to configure e-mail, expert, and security settings.
You must use DeviceInstaller for the configurable pins’ settings.
Unit Configuration Settings
Click the Unit Configuration button to display the following page. This page contains
the Server Configuration and the Port Configuration settings. These are the current
settings read from the device.
Note: The following examples represent typical web pages. See the
Lantronix web site for the latest version.
The following figure shows the information available on the Unit Configuration web
page.
3-4