Linksys WPS11 - Manual (Page 13)

20
Logical Port Configuration:
Logical Port Configuration Icon
To set or change the Wireless PrintServer’s logical port set-
tings, highlight the Wireless PrintServer to be changed and
click on the Logical Port icon (shown in Figure 5-7). The
Logical Port Configuration window will appear. Make
any changes to the settings, and click on Save to Device
when you are finished.
Upgrading the Firmware:
The Firmware Upgrade Icon
To make sure that the Wireless PrintServer is running its
most current version of firmware, upgrade the device’s
ROM chip regularly. To do so, you must be able to access
the Wireless PrintServer device from your computer. Click
on the Upgrade Firmware icon and follow the instructions
on the screen. For the latest firmware, go to the Linksys
website at www.linksys.com.
Refreshing the Device List:
The Refresh Icon
To force Bi-Admin to refresh its list of PrintServers on the
network, click Refresh, and Bi-Admin will scan the net-
work for available PrintServers to update the Default
Names, Device Names, and Printer Port charts.
Exiting Bi-Admin:
The Application Exit Icon
To exit the Bi-Admin program, just click on the Exit icon.
Wireless PrintServer
19
Checking the Status of a Printer Port:
Printer Status Icon
The numbered Printer Port icons let you check the name,
status, and printing details of each printer attached to the
Wireless PrintServer. A password may be required to access
this information. You may be able to configure some print-
ers’ settings within the Printer Status window.
The Wireless PrintServer only shows as many parallel port icons as it has ports.
For example, with this model, only two parallel port icons will show. Because
Wireless PrintServers do not support serial printing, the serial port icon will
always remain gray and inaccessible.
TCP/IP Configuration:
TCP/IP Configuration Icon
To set or change the Wireless PrintServer’s TCP/IP set-
tings, highlight the Wireless PrintServer to be changed and
click on the TCP/IP Configuration icon (shown in Figure
5-5). The TCP/IP Configuration window will appear.
Make any changes to the settings, and click on Save to
Device when you are finished.
Configuring Wireless:
The Wireless Icon
To configure the wireless settings, just click on the Wireless
icon. The Wireless Configuration screen will appear.
Settings include SSID, Channel Number, Network Type, and
WEP encryption options. Make any changes to the settings,
and click on Save to Device when you are finished.
Instant Wireless™ Series
Figure 5-3
Figure 5-4
Figure 5-7
Figure 5-8
Figure 5-7
Figure 5-6
Figure 5-5