Time, Figure 23 time screen – Liebert 610 User Manual

Page 41

Operation

Time

This is the system’s real-time clock. To reset the time do the following:
1. From the System Configuration screen, press the Up or Down pad to move the highlighted cursor

to Time.

2. Press the Select pad. The Time screen will appear.
3. Press the Select pad to move the arrow to the next digit to the right.
4. When the arrow is on the digit to be changed, press the Up or Down pad to increase or decrease

the hour/minute/second number.

5. Press Select to set the value and move to the next digit.
6. After the correct hour/minute/second has been set, press the Select pad again to return to the

System Configuration screen.

Figure 23 Time screen

NOTE
1. Precise Date and Time functions are required for accurate archival and event history

purposes.

2. Both the Date and Time can be set from a remote terminal.

Refer to 3.2.14 - Communication Interfaces.

TIME

INCREASE VALUE

DECREASE VALUE

WALK-THRU/ EXIT

UP :

DOWN :

SELECT :

09:15:00