Date, Figure 22 date screen – Liebert 610 User Manual

Page 40

Operation

Date

This is the system’s real-time date setting. To reset the date, do the following:
1. From the System Configuration screen, press the Up or Down pad to move the highlighted cursor

to DATE.

2. Press the Select pad. The Date screen will appear.
3. Press the Select pad to move the arrow to the next digit to the right.
4. When the arrow is on the digit to be changed, press the Up pad to increase the number or the

Down pad to decrease it.

5. Press Select to set the value and move to the next digit.
6. After the correct month/day/year has been set, press the Select pad again to return to the System

Configuration screen.

Figure 22 Date screen

NOTE
1. Precise Date and Time functions are required for accurate archival and event history

purposes.

2. Both the Date and Time can be set from a remote terminal. Refer to 3.2.14 -

Communication Interfaces.

DATE

INCREASE VALUE

DECREASE VALUE

WALK-THRU/ EXIT

UP :

DOWN :

SELECT :

01/17/96