LSI SATA 150 - Manual (Page 35)

MegaRAID PCI to Serial ATA Storage Adapters 3-5
Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
operating system boots. The Power Console Plus tool enables the user
to manage RAID functions over a network.
Figure 3.2 SATA 150-4 Board Layout
Table 3.3 lists the connectors on the SATA 150-4. Figure 3.2 shows the
layout of the SATA 150-4.
J1 J2
J4 J5 J6
J13
J16
J17
J7 J8 J9 J10
Port 0 Port 1 Port 2 Port 3
Table 3.3 SATA 150-4 Connector and Jumper Description
Jumpers
and
Connectors
Description Setting
J1 Reserved for internal use Do not
install a
jumper.
J2 Open - BIOS enabled; Installed - BIOS disabled Open
J4 Write Pending connector. Provides a signal that
indicates when the on-board cache contains data
and a write from the cache to the hard drives is
pending. –
J5 Serial I/O connector for Serial EPROM Open