9 technical support, 2 sata 150 storage adapter characteristics, Technical support – LSI SATA 150 User Manual
Page 20: Sata 150 storage adapter characteristics
1-6
Introduction
Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Refer to the MegaRAID Device Driver Installation User’s Guide on the
Universal Driver Suite CD for information about installing the device
drivers. Be sure to use the latest Service Packs provided by the
operating system manufacturer and review the readme file that
accompanies the driver.
Note:
The SATA 150 adapters do not support the Windows
®
NT
operating system. See the LSI Logic web site for the latest
operating systems and drivers.
1.1.9
Technical Support
For assistance installing, configuring, or running your MegaRAID SATA
150 RAID storage adapter, contact LSI Logic Technical Support.
E-mail:
[email protected] (Europe)
Phone Support:
1-800-633-4545 (North America)
+44.1344.413.441 (Europe)
Web Site:
1.2
SATA 150 Storage Adapter Characteristics
This section describes the hardware and software characteristics of the
SATA 150 storage adapters, and the software utilities you can use for
RAID management. All models of the SATA 150 storage adapter support
these aspects of the Serial ATA and PCI specifications:
•
Serial ATA, Revision 1.0, specification:
–
150 Mbytes/s bus speed
–
Theoretical 1.5 Gbits/s data transfer rate