the 14-pin MS-style connector. The Construction
model of the Invertec V350-Pro does not have the
14-pin MS-style connector) These supplies are
intended to supply power for auxiliary equipment like
wire feeders and the TIG Module.

• 115VAC supply is rated at 2 amps and is protected by a 3.5

amp breaker.

• 42 VAC supply is rated at 5.5 amps and is protected

by a 6 amp breaker.

• 24 VAC supply is rated at 5.5 amps and is protected

by a 6 amp breaker.

LIMITATIONS

• The V350-Pro is not recommended for processes

other than those listed.

• The V350-Pro can only be used with the recom-

mended equipment and options.

RECOMMENDED PROCESSES

Properly equipped, the Invertec V350-Pro supports
GMAW-P, FCAW, SMAW, GTAW and CAC-A
processes for a variety of materials, including mild
steel, stainless steel, cored wires, and aluminum.

OPERATION