LSI 40909G-S - Manual (Page 16)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-4 Installing the LSI40909G-S
Figure 2.1 Hardware Connections for the LSI40909G-S
Step 7. Carefully insert edge connector J1 (see Figure 2.1 ) of the host
adapter into the PCI slot.
Make sure the edge connector is properly aligned before
pressing the board into place as shown in
Figure 2.2 . The
bracket around connector J2 should fit where you removed the
blank panel.
GBIC
Connector J2
Fibre Channel
Link Activity/
Link Fault LED
LSI40909G-S PCI Bus
Edge Connector J1