Lexmark 4097-00X User Manual
Lexmark Printers
Table of contents
Document Outline
- Table of Contents
- Preface
- 1. General Information contains a general descript...
- 2. Diagnostic Information contains an error indica...
- 3. Diagnostic Aids contains tests and checks used ...
- 4. Repair Information provides instructions for ma...
- 5. Connector Locations uses illustrations to ident...
- 6. Preventive Maintenance contains the lubrication...
- 7. Parts Catalog contains illustrations and part n...
- 1. General Information contains a general descript...
- Safety Information
- 1. General Information
- 2. Diagnostic Information
- 3. Diagnostic Aids
- 4. Repair Information
- Handling ESD-Sensitive Parts
- Adjustments
- Removal Procedures
- Releasing Plastic Latches
- 2. Remove the printhead carrier without disconnect...
- 3. Remove the carrier belt.
- 4. Depress the latch on the idler pulley, slide it...
- 2. Remove the carrier frame.
- 2. Remove the carrier frame.
- 3. Depress the two clips on the rear of the carrie...
- 4. Remove the spring and actuator lever from the f...
- 5. Lift and remove the wiper assembly.
- 6. Remove the cap assembly.
- 7. Remove the felt gutter pad.
- 2. Remove the carrier frame.
- 2. Remove the carrier frame.
- 2. Remove the carrier frame.
- 2. Remove the carrier frame.
- 3. Disconnect the printhead carrier cables from th...
- 10. Remove the home sensor screw from the rear of ...
- 11. Remove the printhead cable retainer clip screw...
- 12. Depress the two clips on the top of the cradle...
- 13. Remove the carrier cable and note the routing ...
- 2. Push the mounting tabs toward the center of the...
- 2. Remove the carrier frame.
- 3. Remove the sheet feeder
- 4. Facing the rear of the machine, remove the smal...
- 5. Unhook the four small feed roller springs from ...
- 6. Slide the EOF flag to the right and remove. Not...
- Releasing Plastic Latches
- 5. Connector Locations
- 6. Preventive Maintenance
- 7. Parts Catalog
- 1 -1
- 17D0561
- 1
- Cover, Rear Asm (001)
- 1
- 17D0562
- 1
- Cover, Rear Asm (002)
- 2
- 17D0590
- 2
- Screws, (PP)
- 3
- 17D0550
- 1
- Base Asm (001)
- 3
- 17D0551
- 1
- Base Asm (002)
- 4
- 17D0560
- 1
- Buttons and Lens Asm (Operator Panel)
- 5
- 17D0554
- 1
- Cover, Access (001)
- 5
- 17D0555
- 1
- Cover, Access (002)
- 6
- 17D0552
- 1
- Cover, Front (001)
- 6
- 17D0553
- 1
- Cover, Front (002)
- 7
- 17D0557
- 1
- Tray, Exit Asm (001)
- 7
- 17D0558
- 1
- Tray, Exit Asm (002)
- 8
- 17D0590
- 4
- Feet, Machine (PP)
- NS
- 7350160
- 1
- Package, Plain B/M Includes: Carton, Cushion Set, ...
- 2 -1
- 17D0566
- 1
- Roller, Small Feed Asm
- 2
- 17D0589
- 1
- Lever, EOF Asm
- 3
- 17D0565
- 1
- Roller, Large Feed with Gear Asm
- 4
- 17D0564
- 1
- Roller, Star Asm / Mid Frame with Brackets
- 5
- 17D0569
- 1
- Roller, Exit Asm with Gear
- 6
- 17D0568
- 1
- Plate, Gear Asm without Motor
- 7
- 17D0567
- 1
- Motor, Paper Feed Asm with Gear
- 8
- 17D0584
- 1
- Sheet Feeder Asm (001)
- 8
- 17D0585
- 1
- Sheet Feeder Asm (002)
- 3 -1
- 17D0570
- 1
- System Board
- 2
- 17D0590
- 4
- Screws, (PP)
- 3
- 17D0559
- 1
- Operator Panel / Power Connector
- NS
- 17D0575
- 1
- Power Supply, External (LV) 100 Japan
- NS
- 17D0576
- 1
- Power Supply, External (LV) 120
- NS
- 17D0577
- 1
- Power Supply, External (HV) 220
- 4 -1
- 17D0578
- 1
- Carrier Assembly (Complete)
- 2
- 17D0580
- 1
- Rod, Carrier Guide
- 3
- 17D0579
- 1
- Printhead Rubber Backers
- 4
- 17D0581
- 1
- Cartridge Interlock Keys
- 5
- 17D0572
- 1
- Printhead / Home Sensor Cable
- 5 -1
- 17D0590
- 11
- Screws, (PP)
- 2
- 17D0582
- 1
- Motor, Carrier Transport with Gear
- 3
- 17D0590
- 2
- Retainers, Carrier Guide Rod (PP)
- 4
- 17D0583
- 1
- Belt, Carrier
- 5
- 17D0580
- 1
- Rod, Carrier Guide
- 6
- 17D0588
- 1
- Pulley, Idler Asm
- 7
- 17D0563
- 1
- Frame, Carrier
- 8
- 17D0564
- 1
- Roller, Star Asm / Mid Frame with Brackets
- 7 -1
- 17D0586
- 1
- Maintenance Station
- 2
- 17D0587
- 1
- Wipers and Caps
- 3
- 17D0556
- 1
- Gutter Pad
- Index