Remove the printhead carrier without disconnect, Remove the carrier belt, Depress the latch on the idler pulley, slide it – Lexmark 4097-00X User Manual
Page 28

Repair Information
4-3
4097-00X
Access Cover Removal
1. Open the access cover.
2. Push the mounting tabs toward the center of the machine.
3. Remove the access cover.
Buttons / Lenses Removal
1. Remove the front cover.
2. Depress the button clips and remove the buttons.
3. Lift and remove the lenses.
Carrier Belt / Idler Pulley Removal
1. Remove the front cover.
2. Remove the printhead carrier without disconnecting the system
board cables.
3. Remove the carrier belt.
4. Depress the latch on the idler pulley, slide it to the left and
remove.
Carrier Frame Assembly / Base Removal
1. Remove the front cover.
2. Remove the six screws that secure the carrier frame to the base
assembly.
3. Remove the paper guide.
4. Tilt the lower part of the carrier frame up and remove the carrier
frame.
Note: Be sure the parallel cable clips are not trapped inside the
cover.
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 302 (274 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z35 (101 pages)
- Z25 (24 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)