Service checks, Envelope feed service check, First print line service check – Lexmark 4076-0XX User Manual
Page 23: First print line ser, First print line service, Envelope feed service
4076-0XX
Diagnostic Information
11
SIMM Problem
Service Checks
Envelope Feed Service Check
First Print Line Service Check
SYMPTOM
ACTION
Can’t write to SIMM
Go to the
FRU OR PROCEDURE
ACTION
1
Envelope Loading
Be sure the envelope guides have
been turned to the envelope load
positions
Be sure the envelope guides are
against the envelopes
Go to and perform the
.
FRU OR PROCEDURE
ACTION
1
End-of-Forms Flag
Check the flag for binds or damage.
2
End-of-Forms Sensor
Check the sensor for dirt.
3
System Board
Perform the
to check the end-of-forms sen-
sor.
4
Feed Arm Assembly
Check all parts of the feed arm assem-
bly for binds, wear, or damage.
5
Software Setting
Use Toolkit, on the setup diskette, to
adjust the Top of Form setting.
6
Operator Panel
Go to the
“ Note: if the failure remains,
replace the system board” on page 12
.