Lobos Tech LB-FEA800M - Manual (Page 79)

* Executing TFTP software
* Copy firmware update version image.bin to TFTP software directory.
* In web management select administrator— TFTP update firmware.
* Download new image.bin file then in web management press
firmware>.
5-4-13. Configuration Backup
5-4-13-1. TFTP Restore Configuration
Use this page to set TFTP server address. You can restore EEPROM
value from here, but you must put back image in TFTP server, switch
will download back flash image.
5-4-13-2. TFTP Backup Configuration
Use this page to set TFTP server IP address. You can save current
EEPROM value from here, then go to the TFTP restore configuration