Lobos Tech LB-FEA800M - Manual (Page 31)

Add static MAC address
1.Press --> key to add a static MAC address.
2.Enter the MAC address to and from which the port should
permanently forward traffic, regardless of the devices network activity.
3.In the Port num item, enter the port number.
4.If tag-based (802.1Q) VLAN are set up on the switch, static addresses
are associated with individual VLANs. Type the VID to associate with
the MAC address.
5. Press ESC to go back action menu line, and then select to
save all configure value.
Edit static MAC address
1.Press key to modify a static MAC address.
2.Choose the MAC address that you want to modify and then press
enter.
3.Press key to modify all the items.
4.Press ESC to go back action menu line, and then select to
save all configure value.
Delete static MAC address
1.Press key to delete a static MAC address.
2.Choose the MAC address that you want to delete and then press
enter.
3.After delete static MAC address, you have to press to
complete the deleting operation.