Lobos Tech LB-FEA800M User Manual
Page 24
22
Port / Trunk Configuration
This page can change every port status and configure trunk group. Press TAB
key to change configure of per item.
1. Enabled: User can disable or enable this port control.
2. Auto Negotiate: User can set auto negotiation is enable or disable of per
port.
3. Speed/Duplex Config: User can set 100Mbps or 10Mbps speed on port
1~port 8, only 100Mbps on port 9, and set full-duplex or half-duplex mode.
4. Flow Control: User can set flow control function is enable or disable.
5. Group: User can set trunk group for port1~prot8. There are four trunk
groups to provided configure.
Actions->
menu line.