Lobos Tech LB-FEA800M - Manual (Page 64)

62
with the lowest value has the highest priority and is selected as the
active LACP.
1.Group ID: you can create a link aggregation across two or more ports,
choose the "group id" and click "Get".
2.LACP: If enable, the group is LACP static trunking group. If disable,
the group is local static trunking group.
All ports support LACP dynamic trunking group. If connecting to the
device that also supports LACP, the LACP dynamic trunking group will
be created automatically.
3. Work ports:The max number of ports can be aggregated at the same
time. If LACP static trunking group, the exceed ports is standby and able
to aggreate if work ports fail. If local static trunking group, the number
must be the same as group ports.
4. Select the ports to join the trunking group
5. If LACP enable, you can configure LACP Active/Passive status in
each ports.
6. Click Apply.