3-7-4.max bridge transmit delay bound – Lobos Tech LB-FEA800M User Manual
Page 36
34
4-3-7-4.Max bridge transmit delay bound
Max bridge transmit delay bound: Limit the packets queuing time in
switch. If enable, the packets queued exceed will be drop. Press Space
key to set the time. This valid value are 1sec, 2sec, 4sec and off. Default
is 1 seconds.
Enable Delay Bound: Limit the low priority packets queuing time in
switch. If enable, the low priority packet stays in switch exceed Max
Delay Time, it will be sent. Press Space key to enable or disable this
function.
Max Delay Time: To set the time that low priority packets queuing in
switch. The valid range is 1~255 ms.
NOTE: Make sure of “Max bridge transit delay bound control” is enabled
before enable Delay Bound, because Enable Delay Bound must be
work under “Max bridge transit delay bound control is enabled” situation.
Actions->