Lobos Tech LB-FEA800M - Manual (Page 45)

4-4-4.LACP
4-4-4-1.Aggregator Setting
1.Group: Display the trunk group ID.
2.LACP: Press Space key to enable or disable LACP (Link Aggregation
Control Protocol) support. If enable, the group is LACP static trunking
group. If disable, the group is local static trunking group.
3.LACP Work Port Num: The max number of ports can be aggregated
at the same time. If LACP static trunking group, the exceed ports is
standby and able to aggregate if work ports fail. If local static trunking
group, the number must be the same as group ports.
NOTE: Before set LACP support, you have to set trunk group on the
page of Port / Trunk Configuration first.