Lexmark Z600 - Manual (Page 25)

Printing labels
25
To build your booklet:
1 Remove the first bundle from the paper exit tray, fold it in half, and set it aside.
2 Remove the next bundle, fold it in half, and then stack it on top of the first bundle.
3 Continue to stack the bundles on top of each other until your booklet is complete.
4 Bind the bundles to complete your booklet.
Printing labels
You can load up to 25 sheets of labels at a time, depending on the thickness of the sheets.
Step 1: Load the labels
• Use labels designed for inkjet printers.
• If your labels include instructions, read them carefully.
• Do not print within 1 mm (0.04 in.) of the edge of a label.
• Load the labels vertically against the right side of the paper support.
• Make sure there are no missing or curled labels.