Lexmark 350 Series - Manual (Page 49)

Error messages troubleshooting
Alignment Error
Solution 1
1 Remove the print cartridge.
2 Make sure the sticker and tape have been completely removed.
3 Reinsert the print cartridge.
4 Press to align the cartridge.
Solution 2
Load photo paper, with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the
instructions that came with the paper.)
Load new paper only. The printer will read any markings on used paper, which could cause the alignment error message
to appear.
Carrier Jam
1 Open the access cover.
2 Remove any objects blocking the path of the print cartridge carrier.
3 Make sure the cartridge carrier lid is closed.
4 Close the access cover.
5 Press .
Cartridge Error
1 Remove the print cartridge.
2 Disconnect the power supply cord from the electrical outlet.
3 Reconnect the power supply cord to the electrical outlet.
4 If the button is not lit, press .
Troubleshooting
49