LSI SYM8953U - Manual (Page 31)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure 2-15
2.2.5 Making External SCSI Bus Connections
This section provides step-by-step instructions about making external
SCSI bus connections. To connect external SCSI devices to the
SYM8953U host adapter:
Step 1. Plug the 68-pin HD connector on one end of a shielded external
SCSI cable (see
Figure 2.3 ) into the host adapter connector J3
(see Figure 2.1 ).
This connector is in the bracket attached to the back panel of
your computer.
Figure 2.9 shows how this connection is made.
Figure 2.9 External Cable to Host Adapter
HD Connector