LSI SYM8953U User Manual
Page 28
3.75 pc
10.25 pc
11.25 pc
38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-12
Installing the SYM8953U Host Adapter
If you have more than one internal device to connect, use an internal
SCSI ribbon cable with the required number of connectors attached
along its length and proceed to the next step. If you have only one
internal device, proceed to
Step 3.
Plug the cable into each additional device as needed.
An example of this type of chained connection is shown in
. Make sure to match pin 1 on all connections.
Figure 2.6
Connecting Additional Internal SCSI Devices