LSI SYM8953U - Manual (Page 26)

3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-10 Installing the SYM8953U Host Adapter
2.2.4 Making Internal SCSI Bus Connections
This section provides step-by-step instructions about making internal
SCSI bus connections.
Step 1. Plug one end of the 68-pin internal SCSI ribbon cable into
connector J2 (see
Figure 2.4 ).
Important: You must match pin 1 on this and all subsequent
connections.
Figure 2.4 Internal SCSI Ribbon Cable to Host Adapter
Connection
Internal
SCSI Interface
J2