3 connecting the scsi peripherals, Table 2.1 scsi bus widths and speeds, Connecting the scsi peripherals – LSI SYM8953U User Manual
Page 23
3.75 pc
10.25 pc
11.25 pc
38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
Detailed Installation Procedure
2-7
2.2.3 Connecting the SCSI Peripherals
SCSI bus connections to the SYM8953U host adapter inside your
computer can be made with an unshielded 68 conductor Ultra SCSI PVC
ribbon cable (see
). The lead connected to pin 1 on the cable
is marked with a colored stripe. The connectors on this cable may also
be keyed to ensure proper pin-1 connection.
All external SCSI bus connections to the SYM8953U host adapter are
made with high quality shielded 68 conductor cables (see
).
The connectors on this cable are always keyed to ensure proper pin-1
connection.
Note:
All the cables shown in
are included in the
Symbios Adapter Board Kit for the SYM8953U host
adapter.
You can connect up to eight SCSI, Fast SCSI, and Ultra SCSI devices
on a SE Ultra SCSI bus only if they are evenly spaced on a 1.5-meter
Ultra SCSI cable (0.19 m between devices).
Table 2.1
SCSI Bus Widths and Speeds
STA Terms
SCSI Bus
Width, Bits
SCSI Bus Speed
Maximum Data Rate,
Mbytes/s
SCSI-1
8
5
Fast SCSI
8
10
Fast Wide SCSI
16
20
Ultra SCSI
8
20
Wide Ultra SCSI
16
40
Ultra2 SCSI
8
40
Wide Ultra2 SCSI
16
80
Note: Absence of the word “Wide” means an 8-bit bus width. It is
acceptable to use the word “Narrow” to avoid ambiguity.