Lennox Hearth 8560 - Manual (Page 44)

Call Features
Page 30 Mitel ® Model 8560/8660 User Guide – Issue 12, October 2008
Viewing Caller ID Information
If you are currently connected to an external caller with Caller ID, you can toggle between the
caller’s name and number. If the name is unavailable, CANNOT ACCESS FEATURE appears.
To show the outside party’s name/number:
Press (Special), and then dial 379.
Forwarding Calls
You can use Manual Call Forwarding or System Forwarding to forward calls.
Manual Call Forwarding
You can use Manual Call Forwarding to send incoming calls to another extension or external
number. The following table describes Manual Call Forwarding options.
To use Manual Call Forwarding:
1. Press FWD and then press one of the menu buttons as described in the table above.
ENTER FORWARD DEST appears.
2. Enter the extension number, or press the OUTGOING button or the Outgoing access
code (default code is 8), and then dial the telephone number. You can press the
MESSAGE CENTER menu button to forward calls to the Message Center (voice
mailbox)
2 . FWD ALL CALLS TO <number> appears.
To cancel a Manual Call Forwarding request:
Do one of the following:
• Press the FWD button, and then press (Speaker), or lift and replace the handset. ANY
CALL FORWARD CANCELED appears.
• Or press the FWD button, and then press the FWD OFF menu button.
Call Forward Feature Description Code/Menu Button
Call Forward All Calls All incoming calls are forwarded. 355
ALL
Call Forward if No
Answer All incoming calls are forwarded if not
answered. (The timer is set by the
system administrator.) 356
NO ANSWER
Call Forward If Busy When your endpoint is busy, all incoming
calls are forwarded without ringing. 357
BUSY
Call Forward If No
Answer/Busy All incoming calls are forwarded if your
endpoint is busy or if you do not answer. 358
NO ANSWER/BUSY
2. This feature may or may not be enabled for your system.