Lennox Hearth 8560 - Manual (Page 25)

Mitel ® Model 8560/8660 User Guide – Issue 12, October 2008 Page 11
Personalizing Your Endpoint
Assigning Features to Programmable Buttons
For quick access, you can assign feature codes, extension numbers, or speed-dial numbers to
your programmable buttons. You can then use the programmed buttons to activate features or
place calls. See “
Default Access Codes ” below and “Default Feature Codes” on page 12 for
code lists.
To assign a feature, extension number, or speed-dial code to a button:
1. With the handset on-hook, dial 397.
2. Press the button that you want to program. UNDEFINED KEY appears. If the button is
not programmable, NON-PROGRAMMABLE KEY appears.
3. Enter the feature code, extension number, or speed-dial code (0 to 9) to be assigned to
the button.
Default Access Codes
The following are default system access codes. If your system uses different codes, record the
codes in the “New Code” column for reference.
Outside Line Access Codes
Extension Numbers
NOTES
Before assigning a speed-dial number to a programmable button, you must store
the number with either a Station or System speed-dial code. See “Using Speed Dial”
on
page 21 .
You cannot reprogram the default button assignments.
Code Type Code New Code
Emergency Call 911 (999/112 Europe)
Outgoing Call (Default) 8
Select Line Group 1 to 208 92001 to 92208
Automatic Route Selection 92000
Code Type Code New Code
Attendant 0
Endpoint Extensions 1000 to 1999
Hunt Groups 2000 to 2299