Lennox Hearth 8560 - Manual (Page 23)

Mitel ® Model 8560/8660 User Guide – Issue 12, October 2008 Page 9
Personalizing Your Endpoint
Personalizing Your Endpoint
This chapter describes features you can use to personalize your endpoint.
Adjusting the Viewing Angle
You can tilt the endpoint stand for a better view of the buttons and display.
To adjust the viewing angle:
1. Position the bottom of the endpoint base on a flat surface.
2. Tilt the endpoint to the desired angle.
3. Place the “feet” of the support mechanism in the holes on the base to secure the position
of the endpoint.
Changing Volume Levels
You can change the following volume levels:
• Ringer (alerting tone)
• Handset
• Headset
• Background music
• External speaker
You must be using the feature to change the volume level. For example, if you want to change
handset volume level, you must be using the handset. However, you can adjust the ringer
(alerting tone) volume level when the endpoint is idle.
To change a volume level:
1. While using the feature, press (Up) to increase the volume, or press (Down) to
decrease the volume.
2. Press the center of the button to save the setting.
Changing the Ring Tone
You can select one of nine different ring tones.
To change the ring tone:
1. With the handset on-hook, dial 398.
2. Do one of the following to listen to (or turn off) ring tones:
• Press 0or the RINGER OFF menu button to turn the ringer off.
• Press (Up) or (Down) or 1 to 9 to listen to ring tones.
• Press the PREVIOUS or NEXT menu buttons to listen to and select a ring tone.
3. Press (Speaker), #, the ACCEPT menu button, or lift and replace the handset to
select the ring tone.