LSI MiniHAB 44929LO User Manual
Page 67
Open Boot BIOS
4-17
Ver. 2.0
Copyright © 2002 by LSI Logic Corporation. All rights reserved.
ok 2 set-topology
Topology selected is N_Port
Topology has been set
Change will take effect after system power cycle
ok a set-topology
Topology selected is auto
Topology has been set
Change will take effect after system power cycle
Note:
The system must be power cycled before the changes take
effect. It is not sufficient to execute the
reset-all
command.
This manual is related to the following products: