Lenovo 5110 User Manual
Lenovo Printers
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- Printer overview
- Understanding the printer parts
- Using memory cards (Lenovo 6110 only)
- Using the printer software
- Using the paper type sensor
- Printing ideas
- Printing on plain paper
- Printing photos
- Printing on premium or coated paper
- Printing on both sides of a sheet of paper
- Step 1: Load the paper
- Step 2: Customize the print settings
- Step 3: Print your document
- Printing cards
- Printing envelopes
- Step 1: Load the envelopes
- Step 2: Customize the print settings
- Step 3: Print your envelopes
- Printing color images in black and white
- Step 1: Load the paper
- Step 2: Customize the print settings
- Step 3: Print your document
- Printing a booklet
- Step 1: Load the paper
- Step 2: Customize the print settings
- 1 With your document open, click File Print.
- Step 3: Print your document
- Step 4: Build your booklet
- Printing labels
- Printing handouts
- Step 1: Load the paper
- Step 2: Customize the print settings
- Step 3: Print your handouts
- Printing a poster
- Step 1: Load the paper
- Step 2: Customize the print settings
- 1 With your document open, click File Print.
- Step 3: Print your poster
- Assemble your poster
- Printing iron-on transfers
- Printing transparencies
- Printing your document in reverse order
- Printing a banner
- Step 1: Load the banner paper
- Step 2: Customize the print settings
- 1 With your document open, click File Print.
- Step 3: Print your banner
- Printing on custom size paper
- Step 1: Load the custom size paper
- Step 2: Customize the print settings
- Step 3: Print your document
- Maintenance
- Replacing the print cartridges
- Aligning the print cartridges
- Improving print quality
- 1 From your software program, click File Print.
- 1 Reinsert the print cartridges:
- a Remove the print cartridges. For help, see page43.
- a Load paper. For help, see page13.
- b Open the Lenovo Solution Center. For help, see page11.
- c Click the Maintenance tab.
- d From the Maintenance tab, click Clean to fix horizontal streaks.
- e Click Print.
- f Print your document again to verify that your print quality has improved.
- g If you are not satisfied with your print quality, continue with step3, and then print your doc...
- 3 Wipe the print cartridge nozzles and contacts:
- a Remove the print cartridges. For help, see page43.
- b Dampen a clean, lint-free cloth with water.
- c Gently hold the cloth against the nozzles for about three seconds, and then wipe in the directi...
- d Using another clean section of the cloth, gently hold the cloth against the contacts for about ...
- e With another clean section of the cloth, repeat stepc through d.
- f Allow the nozzles and contacts to dry completely.
- g Reinsert the print cartridges.
- h Print your document again.
- i If the print quality does not improve, repeat step3 up to two more times.
- j If print quality is still not satisfactory, replace the print cartridges. For information, see ...
- Preserving the print cartridges
- Ordering supplies
- Setup troubleshooting
- Troubleshooting checklist
- Solving printer software installation problems
- When I insert the printer software CD, nothing happens.
- 1 Close all open software programs.
- 2 Restart your computer.
- 3 Click Cancel on all screens similar to the following that appear.
- 4 Eject and reinsert the printer software CD.
- 5 From your desktop, double-click My Computer.
- 6 Double-click your CD-ROM drive icon. If necessary, double-click setup.exe.
- 7 Follow the instructions on your screen to complete printer software installation.
- 1 Close all open software programs.
- Removing the printer software
- Installing the printer software
- When I insert the printer software CD, nothing happens.
- General troubleshooting
- Understanding error messages and flashing lights
- Resolving unsuccessful or slow printing
- Printer is plugged in, but does not print
- Test page does not print
- Alignment page does not print
- Printer ejects a blank page after appearing to print
- Printer prints very slowly
- Clearing paper misfeeds or jams
- Solving print quality problems
- Print is too dark or smudged
- Vertical straight lines are not smooth
- Print smears on the page
- Printed pages have alternating bands of light and dark print (intermittent printing)
- Characters are missing or unexpected
- Printed characters are improperly formed or misaligned
- Colors on the printout differ from the colors on the screen
- Colors on the printout are faded
- Photos do not print as expected
- 1 With your document open, click File Print.
- 2 From the Print dialog box, click Properties, Preferences, or Options.
- 3 From the Print Properties dialog box, select the Paper Setup tab.
- 4 From the Paper Size area, select Borderless.
- 5 From the Paper Size menu, select the correct size.
- 6 From the Print Properties dialog box, click OK.
- 7 From the Print dialog box, click OK.
- 1 With your document open, click File Print.
- Solving specialty media problems
- Service station in China
- Notices
- Glossary
- alignment page
- alignment values
- automatic alignment
- Automatic Sheet Feeder (ASF)
- banner paper
- booklets
- bundle
- cartridge contact
- coated paper
- collate
- continuous form paper
- custom size paper
- default printer
- default printer settings
- driver
- duplex
- glossy paper
- handouts
- label
- landscape orientation
- line art
- long-edge binding
- manual alignment
- margins
- mirror
- N-up
- natural color
- operating system
- paper type sensor
- peripheral device
- photo paper
- plain paper
- portrait orientation
- poster
- premium paper
- print cartridge
- print cartridge nozzles
- print queue
- printer driver
- printer port
- printer software
- program
- reverse order printing
- sharpen
- short-edge binding
- side flip
- software program
- top flip
- transparency
- USB cable
- USB port
- watermark
- Index