Lexmark 3200 - Manual (Page 11)

Set the duplex option
6
Set the duplex option
Note: If you press Duplex and no duplex lights come on, no duplex functions can be
performed. This response occurs if the printer does not have duplex capabilities.
Set Collation/Finishing features
Collation is turned off by default. To turn collation on, press Collation/Finishing until you see
Collate in the control panel display, and then press Select. Turning collation on produces complete,
ordered copies of the original.
Finishing features (such as stapling or hole punch) are only available if your printer supports finishing
functions. If your printer does not support finishing, only collation is supported.
Save paper when you print
This process of saving paper is sometimes referred to as N-up. Some features share a panel light.
For example, the same panel light is on for both 4-up and 4-up Landscape printing.
Duplex option Description Display message
Two single-sided originals are copied
to one two-sided copy (long edge or
short edge). 1 > 2
1 > 2 short edge
One double-sided original is copied to
two single-sided copies. 2 > 1
(available only if scanner
supports duplex)
A double-sided original is copied to a
double-sided copy. 2 > 2
(available only if scanner
supports duplex)